WUXI HENGRUIYANG INTERNATIONAL CO., LTD
Wuxi Hengruiyang International Trade Co., LTD
Add to Cart
3 In 1 Decoiler Straightener Feeder Feeding Speed Max 65 M/Min.
Decoiler: The decoiler component of the machine typically has a maximum load capacity of several tons and can accommodate metal coils with a width of up to several meters. The decoiler has a motorized spool that unwinds the metal strip and a braking system that applies tension to prevent the strip from unraveling too quickly.
Straightener: The straightener component of the machine typically has several sets of rollers, each with a different diameter. The rollers are positioned in a way that gradually straightens the metal strip as it passes through the machine. The straightening rollers are powered by electric motors and can be adjusted to apply different levels of pressure, depending on the thickness and type of metal being processed.
A Typical Combined Straightener Feeder has following properties (Depending on the customer request):
| Max strip width: | 1200 mm |
| Stock Thickness: | 1.2-4.0 mm |
| Feeding pinch rolls: | 2 |
| Roll Diameters: | 100 mm |
| Feeding Speed: | Max 65 m/min. |
ELECTRICAL INFORMATION
| Operating Voltage: | 380 V AC |
| Control Voltage: | 24 V DC 3A max. |
| Control output: | Programmable 7 set of no-nc relay output (250 V AC, 5A) |
MECHANICAL INFORMATION
| Alloyed, hardened and ground feeding rolls material |
| Synchronized driving mechanism for top and bottom rolls |
| Special design of bearing mechanism |
| Synchronized driving mechanism for straightening rolls |
| Encoder cylinder and driving mechanism |
What Service Do We Provide?
FAQ
Q: What size of LPG cylinder your machine can produce?
A: 6kg, 12kg,15kgs and 50kgs LPG cylinder for cooking and other size according customers' requirement.
Q: Can you design machines according LPG cylinder technical drawing?
A: Sure, please send your technical drawing to us.
Q: What are the benefits to choose your machines?
A: Our machines are strong and reliable for long term industrial manufacturing
We need to know following information to quote you correct machines:
1. Technical Drawing of the cylinders you want to make?
2. What size of cylinder you want to produce?(such as 6kg, 12kg)
3. What diameter and thickness of the cylinder you want to make?
4. Are you new in this area or you already have some machines in the workshop?
5. Capacity you require, i.e. how many pieces and sizes you want to make per day?
